Microscope Lamps and Accessories
Electron Microscopy Sciences EMS Platinum Aperture with 100 µm hole, 0.06 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 100 µm
O.D.: 6.35 mm
Thickness: 0.06 mm
Ted Pella Inc Specimen Mount, Ø15 x 6mm x M4, 10/pk
Specimen Mounts for the Hitachi TM4000/TM3030/TM3000/TM1000 Tabletop SEM's
Ted Pella Inc ULTRAMICRO-NEEDLE,30DEG,0.50MM
Ultra Micro-Needle, tungsten, 30° tip radius 5 µm, 0.50mm (0.020")
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SM Medium-Hard Bond, 15 µm Particles, 200 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 15 µm
Diameter: 200 mm
Cole-Parmer Replacement strobe lamp for all digital stroboscopes
Keep your stroboscope working with this replacement light bulb.
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SH Hard Bond, 6 µm Particles, 300 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 6 µm
Diameter: 300 mm
Electron Microscopy Sciences Gilder Thin Bar Square 300 mesh Copper Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Copper
Pitch: 83 µm
Hole: 73 µm
Bar: 10 µm
:
Electron Microscopy Sciences TEM Screen Recoating JEOL 1200, 2000-4000 Series, Small
For optimum viewing, fluorescent screens should be recoated regularly. Viewing screens are easily damaged by the electron beam, especially at high accelerating voltages where knock-on damage can be severe. A proprietary process where 1 to 2 micron particles of phosphor are deposited on the screen and produce the highest possible resolution.
Electron Microscopy Sciences Shorter Pin SEM Stub 45° Low Profile, 1/2" Head with 1/4" Pin, Aluminum
45° Low Profile SEM stub specimen mount with shorter pin (6 mm) and 45 degree mounting surfaces for use with Zeiss/LEO scanning electron microscopes, FE-SEMs & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 1/2"
Pin height: 1/4"
Cole-Parmer Meiji Techno Microscope C-Mount Adapter for Canon 35 mm Camera
Use adapters to attach a 35-mm camera or video camera to the photo tube of your microscope.
Electron Microscopy Sciences Standard Pin SEM Stub 100 mm Head, Aluminum, 3.2 mm Pin diameter
Pin stub mount for use with AMRAY, Cambridge, Leica, ZEISS/LEO, FEI/PHILIPS, CanScan, and Tescan. Made from ultra-pure aluminum with a standard lathe finish.
Head: 100 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences TEM Screen Recoating Phillips Small Focusing
For optimum viewing, fluorescent screens should be recoated regularly. Viewing screens are easily damaged by the electron beam, especially at high accelerating voltages where knock-on damage can be severe. A proprietary process where 1 to 2 micron particles of phosphor are deposited on the screen and produce the highest possible resolution.
Electron Microscopy Sciences Omniprobe Lift-Out Grid 3-Post, Shallow Downset, Cooper
3 post copper lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations with both vertical bar and "V" shaped attachment surfaces. These grids have a shallower downset and slightly wider center post than 75964-01. Packaged in glass vials.
Material: Copper